1. Product groups

Drinks

Food

2. Products

Flexbar, machines and evaporator segments

Building your own Flexbar.

First of all, decide whether you want to install a plug ready or a split bar. For a plug ready bar, you start with a machine unit (X/MU or X/1HB) with an end panel on each side. For a split bar, start with an evaporator segment (X/VS20 or X/VS00) with an end panel on each side. You can add storage segments to the machine unit or the evaporator segment to your own requirements and specification.

Send link by mail

Notify a friend of this page!

Your name:
Your e-mail address:
Your message to the receiver:
Receivers e-mails address:
	Send

The data will not be saved, it will only be used for sending the e-mail.

Print page

3. Product details

X/VS20, Evaporator segment

Evaporator segment for split installation**

Dimensions W x D x H with feet:
200 x 560 x 860/880 mm
Power consumption: 80 W*
Defrost/drip water: automatic/drainage 20 mm
Power supply: 220-240 V / 50Hz / 1~
Electronic thermostat: +2°C / +12°C

* conditions: Te = -5°C, Tc = 45°C, ambient temperature = 25°C
** For split installation, a separate machine unit is required

Bar design starts with Gamko